|
This machine is an automatic
rubber roller husker newly
developed, It's highly automatic
with good capacity. As an
updated machine for rice
processing, it's resulted from
advanced techniques,easy and
convenient for use.
1.The sensor is used to test the
material level.There is a feed
machine.When the material
reaches a certain level,the
machine will be turned on
automatically. The feed gate
will be opened and the husker
will begin to work. If the
material is discontinued or
below the set level,the gate
will be closed and the machine
will be turned off automatically
and stop work. 2.The material
will be feed by means of
vibration,which can ensure the
even layer and flow of the
meterial on the shedding
plate,and keep stable the length
and direction of the rubber
rollers as well as the husking
rate. 3.The air pressure
is employed to adjust the
rollers.The pressure between the
rollers is even with less
undulation,which helps stabilize
the husking rate. 4.As the
rubber rollers wear out,the long
shedding plate can automatically
trace and orient toward the
target area between the two
rollers till the rubber layer is
used up. 5.The change gear box
is used to adjust the speed in
order to get the optimum
technical parameters. | 
